Yamaha HTR-5790 ユーザーズマニュアル

■

You can enjoy 2-channel stereo playback even from multi-
channel sources.

y

You can use a subwoofer with this program when SWFR or 
BOTH is selected in LFE/BASS OUT.

■

Press STRAIGHT/EFFECT to select STRAIGHT.
Two channel stereo sources are output from only the front 
left and right speakers. Multi-channel sources are decoded 
straight into the appropriate channels without any 
additional effect processing.

Press STRAIGHT/EFFECT again so that “STRAIGHT” 
disappears from the display when you want to turn the 
sound effect back on.

■

Virtual CINEMA DSP allows you to enjoy the CINEMA 
DSP programs without surround speakers. It creates 
virtual speakers to reproduce the natural sound field.
If you do not connect surround speakers, Virtual CINEMA 
DSP activates automatically whenever you select a 
CINEMA DSP sound field program.

Virtual CINEMA DSP will not activate, even when SURR L/R 
SP is set to “NONE” (see page 49) in the following cases:

– When MULTI CH INPUT is selected as the input source.
– When headphones are connected.

This unit comes with a variety of input jacks. Do the 
following to select the type of input signals you want to 
use.

AUTO

Automatically selects input signals in 
the following order:
1) Digital signals*
2) Analog signals

DTS

Selects only digital signals encoded in 
DTS. If no DTS signals are input, no 
sound is output.

ANALOG

Selects only analog signals. If no 
analog signals are input, no sound is 
output.

* If this unit detects a Dolby Digital or DTS signal, the 

decoder automatically switches to the appropriate sound 
field program.

y

You can adjust the default input mode this unit selects when the 
power is turned on (see page 54).

  2 c h   S t e r e o

STRAIGHT

EFFECT

D V D   A U T O

00_HTR-5790U_EN.book  Page 34  Tuesday, December 9, 2003  9:16 AM