Video Products VOPEX-SV-2-LC プリント

The VOPEX-SV-2-LC S-Video Splitter allows two S-Video displays to be driven
from the same S-Video source.    The S-Video may come from sources such as
a PC, DVD player, satellite receiver, or VCR to name a few.   With 150 MHz
bandwidth, the VOPEX-SV-2 supports standard S-Video resolution–up to 800 x 600.

1. 

Turn OFF power to source and display(s).

2. 

Disconnect the S-Video cable from the source and reconnect it to the female connector labeled "S-VIDEO OUT 1"  on the

        VOPEX-SV-2-LC.
3. 

Install one male end of the SVEXT-3-MM cable (supplied) into the source’s S-Video output connector.

4. 

Install the other male end of the SVEXT-3-MM cable into the female connector labeled "S-VIDEO IN" on the VOPEX-SV-2-LC.

5. 

An additional display may be plugged into the remaining female connector labeled "S-VIDEO OUT 2" as required.

6. 

Plug in the AC adapter and connect it to the VOPEX-SV-2-LC.

7. 

Turn ON power to the source and display(s).

No Video

• Connect power to VOPEX-SV-2-LC
• Cable connections not secure

Poor Resolution

• Make sure the display is plugged into S-
VIDEO IN on the VOPEX-SV-2-LC

VPI

VIDEO
PRODUCTS
INCORPORATED

VPI

R

Vi deo Products I nc