Aleratec 260203 ユーザーズマニュアル

www.aleratec.com

14

6.  Press the “USB” button on the duplicator and set the USB mode to “Off”. 

Reboot the duplicator by turning it off and then on again.  After the device has 

completed the start up process, press the “Print” fast key (also menu option 2) 

on the main menu of the duplicator and push the ENT key.

7.  The “Please Select Label” menu will appear. The newly created label file will 

appear below this prompt within the “label” folder.  If there are multiple files, 

use the UP and DOWN arrow keys to make your selection. Press the ENT key.

8.  Next, the “Counter Selection” menu will prompt you to choose the number 

of copies you want to make. You can select “No Counter” if you prefer to copy 

continuously, or you can select “Specify Counter” to specify the number of 

copies (1 to 9999).
Note: See page 27 of this User Guide for instructions on using “No 
Counter”, and “Specify Counter”. 

When you are satisfied with the number press the ENT key one more time.  

This will eject all of the drives.

9.  Load the drives with LightScribe discs, label side facing down. Close the drive 

trays by pressing the drive tray button or lightly pushing the tray to close itself. 

The printing process will begin automatically after all of the drives have been 

retracted and the discs have been recognized.
Note: If you would like to manually start printing without waiting for all of 
the discs to be recognized, or if you selected “No Counter”, wait until the 
device recognizes at least one disc. The display will prompt you to “Go”.  
Press the ENT button and the printing process will begin.

10.  When the disc printing is complete the drives will automatically eject. If you 

are printing additional discs, reload the trays and close them manually to 

continue.