Multiquip MVH-150GH ユーザーズマニュアル
PAGE 12 — MVH-150GH/D — OPERATION AND PARTS MANUAL — REV. #2 (12/04/06)
l
MVH-150GH/D COMPONENTS (HONDA GX200K1 ENGINE)
Figure 2. Engine Controls & Components
1.
Fuel Filler Cap – Remove this cap to add unleaded
gasoline to the fuel tank. Make sure cap is tighten securely.
DO NOT over fill.
gasoline to the fuel tank. Make sure cap is tighten securely.
DO NOT over fill.
2.
Throttle Lever – Used to adjust engine speed (fast-slow).
3.
Recoil Starter (pull rope) – Type of engine starting method.
Alternate type would be electric start (ignition key).
Alternate type would be electric start (ignition key).
4.
Starter Grip – Grip this handle to start engine. See engine
starting section of this manual.
starting section of this manual.
5.
Fuel Valve Lever – OPEN to let fuel flow, CLOSE to stop
the flow of fuel.
the flow of fuel.
6.
Choke Lever – Used in the starting of a cold engine, or in
cold weather conditions. The choke enriches the fuel
mixture.
cold weather conditions. The choke enriches the fuel
mixture.
7.
Air Cleaner – Prevents dirt and other debris from entering
the fuel system. Remove wing-nut on top of air filter
cannister to gain access to filter element.
the fuel system. Remove wing-nut on top of air filter
cannister to gain access to filter element.
8.
Spark Plug – Provides spark to the ignition system. Set
spark plug gap to 0.6 - 0.7 mm (0.028 - 0.031 inch) Clean
spark plug once a week.
spark plug gap to 0.6 - 0.7 mm (0.028 - 0.031 inch) Clean
spark plug once a week.
9.
Muffler – Used to reduce noise and emissions.
10. Fuel Tank – Gasoline engine Holds 3.8 quarts of unleaded
gasoline. Diesel engine holds 3.4 quarts of diesel fuel.