Multiquip MVC-88VGE/VGEW ユーザーズマニュアル

Figure 1 shows the location of the basic controls and components
of the MVC-88VGE/VGEW Plate Compactor. The function of each
control  is described below:

1.

Water Tank Cap (VGEW Only) – Remove this cap to add
water to the water tank.

2.

Fuel Tank Cap – Remove this cap to add fuel.

3.

Lifting Bale – When lifting of the compactor is required
either by forklift, crane etc., tie rope or chain around this
lifting point.

4.

Handle Bar  – When operating the compactor use this
handle bar  to maneuver  the compactor.

5.

Gasoline Engine – This plate compactor uses a ROBIN
engine. Refer to the ROBIN owner's manual for  engine
information and related topics.

6.

Belt Cover – Remove this cover to gain access to the
V-belts. NEVER run the compactor without the V-belt cover.
If the V-belt cover is not installed, the possibility exists that
your hand may get caught between the V-belt and clutch,
causing serious injury and bodily harm.

7.

Vibrating Plate – A flat, open plate made of durable cast
iron construction used in the compacting of soil.

8.

Vibration Case – Encloses the eccentric, gears and
counter weights.

9.

Water Tube (Sprinkler) – Supplies water to the soil via a
splash plate.

10. Water Shut-Off Valve – Turn this valve downward to let

water flow from the water tank to the water tube.

11. Water Tank (VGEW only) – Holds 13.7 quarts of water

(removable, no tools required).