Multiquip MVC-88VGE/VGEW ユーザーズマニュアル

1. Place the

 fuel valve lever (Figure 9) in the "ON" position.

2. Place the

 Engine ON/OFF switch (Figure 10) in the "ON"

position.

3. Place the

 Choke Lever (Figure 11) in the "OPEN" position.

The  CLOSED  position of the
choke lever enriches the fuel
mixture for starting a COLD
engine. The OPEN  position
provides the correct fuel
mixture for normal operation
after starting, and for restarting
a warm engine.

4. Place the

 throttle lever (Figure 12) halfway between fast

and 

slow.

5. Grasp the starter grip (Figure 13) and slowly pull it out. The

resistance becomes the hardest at a certain position, corre-
sponding the compression point. Rewind the rope a little from
that point and pull out sharply.

DO NOT pull the starter rope all the way to the end

O NOT release the starter rope after pulling. Allow it to

rewind as soon as possible.

DO NOT attempt to run the compactor until
the Safety and Initial Start-upsectionshave
been read and understood.

FUEL

LEVER

ENGINE

ON/OFF

SWITCH

Nnnn

CHOKE

LEVER

THROTTLE

LEVER

STARTER GRIP