HP (Hewlett-Packard) 132A ユーザーズマニュアル
Chapter 4 Command Reference
Introduction
Programming Guide
4-143
*WAI
(Wait-to-Continue Command)
*WAI
This command prevents the instrument from executing any further commands or
queries until the measurement cycle transitions from measuring to idle. The only
way to cancel this “holdoff” is by device clear or power-on. (*RST and *CLS
have no affect on *WAI operation.)
queries until the measurement cycle transitions from measuring to idle. The only
way to cancel this “holdoff” is by device clear or power-on. (*RST and *CLS
have no affect on *WAI operation.)
See the section titled “Using the *WAI Command,” page 3-4 6, in
Chapter 3 for an example using this command.
Chapter 3 for an example using this command.