Sony CCp-8000 ユーザーズマニュアル
Chapt
er
16
Eng
inee
ring
S
e
S
e
tu
p
240
Setup Relating to Switcher Processor
4
To enable through mode, press [Through Mode], turning it on.
Making video process settings
Use the following procedure.
1
In the Switcher>Input menu, press [Video Process].
The Video Process menu appears.
The status area shows the source number, source name, and video process
adjustment settings.
The status area shows the source number, source name, and video process
adjustment settings.
2
Using any of the following methods, select the input signal to which the
settings apply.
settings apply.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.
3
Press [Video Process], turning it on.
4
Adjust the following parameters.
To set the parameter settings to their defaults, press [Unity].
Enabling the illegal color limiter
To enable the illegal color limiter for the signals generated by the switcher
internal matte generator, press [Matte Illeg Col Limit] in the Switcher>Input
menu, turning it on.
internal matte generator, press [Matte Illeg Col Limit] in the Switcher>Input
menu, turning it on.
Signal Output Settings (Output Menu)
For setup relating to signal outputs, use the Switcher>Output menu.
Knob
Parameter
Adjustment
Setting values
6
Src No
Input signal selection
1 to 80
Knob
Parameter
Adjustment
Setting values
1
Video Gain
Video signal gain
−
200.00 to +200.00
2
Y Gain
Y signal gain
−
200.00 to +200.00
3
C Gain
Chrominance signal gain
−
200.00 to +200.00
4
Hue Delay
Hue delay
−
180.00 to +180.00
5
Black Level
Black level
−
7.30 to +109.58