Seagate ST3300056SS (FDE) ユーザーズマニュアル
40
Cheetah 15K.6 SAS Product Manual, Rev. B
Users should use caution exposing any electronic components to uncontrolled chemical pollutants and corro-
sive chemicals as electronic drive component reliability can be affected by the installation
sive chemicals as electronic drive component reliability can be affected by the installation
environment. The sil-
ver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide,
chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components
should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or
exposed to an ambient relative humidity greater than 95%. Materials used in cabinet fabrication, such as vulca-
nized rubber, that can outgas corrosive compounds should be minimized or eliminated. The useful life of any
electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives.
chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components
should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or
exposed to an ambient relative humidity greater than 95%. Materials used in cabinet fabrication, such as vulca-
nized rubber, that can outgas corrosive compounds should be minimized or eliminated. The useful life of any
electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives.
6.4.8
Electromagnetic susceptibility
See Section 2.1.1.1.
6.5
Mechanical specifications
Refer to Figure 12 for detailed physical dimensions. See Section 8.3, “Drive mounting.”
Height:
1.028 in
26.11 mm
Width:
4.010 in
101.85 mm
Depth:
5.787 in
146.99 mm
Weight:
ST3450856SS: 1.563 pounds
ST3450056SS
ST3300656SS: 1.53 pounds
ST3300056SS
ST3146356SS: 1.487 pounds
ST3146756SS
0.709 kilograms
0.694 kilograms
0.674 kilograms