Seagate ST9320424ASG ユーザーズマニュアル
Momentus 7200 FDE.1 SATA Product Manual, Rev. A
27
4.0
Serial ATA interface
These drives use the industry-standard Serial ATA (SATA) interface that supports FIS data transfers. It sup-
ports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6.
The drive also supports the use of the IORDY signal to provide reliable high-speed data transfers.
ports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6.
The drive also supports the use of the IORDY signal to provide reliable high-speed data transfers.
For detailed information about the Serial ATA interface, refer to the “Serial ATA: High Speed Serialized AT
Attachment” specification.
Attachment” specification.
4.1
Hot-Plug compatibility
Momentus 7200 FDE.1 SATA drives incorporate connectors which enable you to hot plug these drives in
accordance with the Serial ATA: High Speed Serialized AT Attachment specification revision 2.0. This specifi-
cation can be downloaded from http://www.serialata.org. This device requires a COMRESET from the host
after a hotplug event.
accordance with the Serial ATA: High Speed Serialized AT Attachment specification revision 2.0. This specifi-
cation can be downloaded from http://www.serialata.org. This device requires a COMRESET from the host
after a hotplug event.
4.2
Serial ATA device plug connector pin definitions
Table 5 summarizes the signals on the Serial ATA interface and power connectors..