Haier HRE10WNAWW ユーザーズマニュアル

1. Remove all packaging material. This includes the foam base and all

adhesive tape holding the refrigerator accessories inside and outside. 

2. Inspect and remove any remains of packing, tape or printed

materials before powering on the refrigerator.

• Your refrigerator has two leveling legs which are located in the front

corners of your refrigerator. After properly placing your refrigerator in
its final position, you can level your refrigerator.

• Leveling legs can be adjusted by turning them clockwise to raise your

refrigerator or by turning them counterclockwise to lower your 
refrigerator. The refrigerator door will close easier when the leveling
legs are raised.

• To assure your refrigerator works at the maximum efficiency it was

designed for, you should install it in a location where there is proper
air circulation, plumbing and electrical connections.

• The following are recommended clearances around the refrigerator:

Sides……………3/4 "(19mm)
Top....................2" (50mm)
Back..................2" (50mm)