Sharp SJ-340S ユーザーズマニュアル

FREEZER TEMP. CONTROL regulates the quantity of 

cold air to the freezer.

If the freezer does not cool even when setting FREEZER 

TEMP. CONTROL to MAX, set REFRIGERATOR TEMP. 

CONTROL to MAX as well.

With FREEZER TEMP. CONTROL set to MAX, there will 

be less cold air directed to the refrigerator compartment, 

and the refrigerator compartment may not become cold 

enough.

REFRIGERATOR TEMP. CONTROL controls the 

compressor running time of the refrigeration system.

MAX setting will result in colder temperature in the both 

(refrigerator and freezer) compartments.

The freezer compartment may not cool sufficiently when 

leaving REFRIGERATOR TEMP. CONTROL as MIN for 

an extensive period. To cool the freezer compartment 

properly, set REFRIGERATOR TEMP. CONTROL closer 

to MAX.

 

 

Do not over fill the Ice cube trays; 

otherwise the ice cubes will be 

joined together when frozen.

When the ice cubes are made, turn 

the lever clockwise to empty the 

ice into the Ice cube box.

To prevent damage to the Ice cube box, 

do not make ice in the Ice cube box or 

pour oil into it.

Deodorizing catalyst is installed on the routes of cold air. 

No operation and cleaning are required.

Defrosting is fully automatic due to a unique energy saving 

system.

This refrigerator is provided with a indicator of temperature 

in the refrigerator compartment to allow you to control the 

average temperature in the coldest zone.

The symbol indicates the coldest zone in the 

refrigerator compartment.

(The door pocket positioned at the same 

height isn’t the coldest zone.)

You can carry out regular checks to ensure the 

temperature in the coldest zone is correct and, if 

necessary, adjust the refrigerator temp. control as 

indicated in the chapter “Controlling Temperature”.

To maintain a correct temperature inside the appliance, 

check that the indicator of temperature is always BLUE. 

If the indicator of temperature turns WHITE, the 

temperature is too high; in this case, increase the 

refrigerator temp. control setting and wait for 6 hours 

before checking the indicator of temperature again.

• The internal temperature of the refrigerator depends on 

various factors such as the ambient temperature of the 

room, the amount of food stored and the frequency of door 

opening.

• When fresh food has been introduced or the door has been 

left open for some time, it is normal for the indicator of 

temperature to turn WHITE.

This is because MAX setting (FREEZER TEMP. 

CONTROL) may result in too little air flow to the 

refrigerator compartment, causing too warm temperature 

in the refrigerator compartment.

If the foods in the refrigerator 

compartment freeze.

This is because the compressor operation is too short in 

winter, and not enough cold air is provided to the freezer 

compartment.

Correct setting

Temperature too high, 

adjust the refrigerator temp. 

control.

(A991)2-6_ENG.fm  Page 4  Monday, April 13, 2009  10:51 AM