Samsung RFG237 ユーザーズマニュアル

Setting Up

 

01 
s

E

ttin

G 

u

P

5.   Position the top table ( 

 ) in place. Insert and tighten 

the 3 screws into the top table with a philips screw 
driver(+). After door opened, reinsert the cap top table  
( 

 ) and close the doors.

When reattaching the top table, make sure that the
wires are not pressed or damaged by the hinge cover.

After assembling, close the door and check to see 

whether the door has gaps between gaskets or is tilted. 

If you see one of them, please refer to “Ad justing the 

doors” page on 15.

 

 

REattaCHinG tHE REFRiGERatoR DooRs

The dispenser door tube (

 

 

) must be fully inserted to the marked line to 

prevent water leakage from the dispenser.

 

 

 

 

4.  Connect the dispenser door tube ( 

 ) and then 

insert a clip on the coupler with pulling tube. Connect 
the connector ( 

 ) on the left side door and two 

connectors ( 

 ) at each side of the top cap.

The clip is enveloped inside of the top cap.