Jenn-Air 2300279C ユーザーズマニュアル
4
INSTALLATION INSTRUCTIONS
Tools and Parts
TOOLS NEEDED:
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Read and follow the instructions provided with any tools listed
here.
PARTS NEEDED:
Custom Overlay Door Panel—See “Overlay Panel—Rear View.”
Hardware (Optional)
PARTS SUPPLIED:
Hardware (Optional)
PARTS SUPPLIED:
Custom Overlay Panel
If you plan to install a custom overlay panel, you will need to
create the panel yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT:
create the panel yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT:
■
The thickness of the wood overlay must be
³⁄₄" (1.91 cm).
■
Overlay panel must not weigh more than 20 lbs (9.07 kg).
■
Overlay panel weighing more than recommended may
cause damage to your refrigerator.
cause damage to your refrigerator.
Overlay Panel—Rear View
Create the custom overlay panel using the dimensions shown.
Install Overlay Hooks
Using a Phillips screwdriver and eight flat-head screws attach the
overlay hooks to the back of the overlay panel. See “Overlay
Panel–Rear View,” for overlay hook locations.
overlay hooks to the back of the overlay panel. See “Overlay
Panel–Rear View,” for overlay hook locations.
Door Hinge Holes
■
The views of the top and bottom hinge pin hole show a right-
hand hinge. Mirror the image for a left-hand hinge.
hand hinge. Mirror the image for a left-hand hinge.
■
We recommend using a C-clamp and two pieces of scrap
wood (front and back) to help reinforce the overlay panel when
drilling the hinge pin holes.
wood (front and back) to help reinforce the overlay panel when
drilling the hinge pin holes.
1. Using a
¹⁄₂" Brad point doweling drill bit, drill a ¹⁄₂" (1.27 cm)
deep hole into the top of the overlay panel for the top hinge
pin as shown.
pin as shown.
Top View
■
Hand drill or electric drill
(properly grounded)
(properly grounded)
■
¹⁄₂" Brad point doweling
drill bit
■
Phillips screwdriver
■
Scissors
■
Masking tape
■
Tape measure
■
Petroleum jelly
■
Flat-head screws (8)
■
Round-head screws (8)
■
Overlay plates (2)
■
Overlay hooks (4)
A. Overlay hook locations
A
23
³⁄₄
"
(60.33 cm)
1
⁵⁄₁₆
"
(3.33 cm)
1
⁵⁄₁₆
"
(3.33 cm)
4
¹³⁄₃₂
"
(11.2 cm)
2
¹⁄₂
"
(6.4 cm)
29
⁷⁄₈
"
(75.88 cm)
A. Overlay hooks (4)
A. Radius 5.0
A
¹⁄₂
"
(1.2 cm)
¹⁷⁄₃₂
"
(1.35 mm)
A
Back Surface
Front Surface