Behringer MDX1600 ユーザーズマニュアル

AUTOCOM PRO-XL MDX1600/COMPOSER PRO-XL MDX2600/MULTICOM PRO-XL MDX4600

5. INSTALLATION

5.1 Rack installation

Each device requires one rack unit for installation in a 19" rack.

Please allow an additional 4" of rack depth for the rear panel

connectors.

Be sure that there is enough air space around the unit for

cooling. To avoid overheating, do not place the unit on power

amps, for example.

5.2 Audio connections

You will need a large number of cables for the different

applications. The illustrations below show the wiring of these

cables. Be sure to use only high-grade cables.

The audio connections of the MULTICOM PRO-XL,

AUTOCOM PRO-XL and COMPOSER PRO-XL are elec-

tronically balanced to avoid hum problems.

You can, of course, also connect unbalanced devices to the

balanced inputs/outputs. Either use mono plugs, or link the ring

and shaft on stereo plugs (or pins 1 and 3 in the case of XLR

connectors).