Frigidaire GLRT188WDZB ユーザーズマニュアル
17
Care & Cleaning
Keep your refrigerator and freezer clean to prevent odor build-up. Wipe up any spills immediately and clean both
sections at least twice a year. Never use any type of metallic scouring pads, brushes, abrasive cleaners or strong
alkaline solutions on any surface. Do not wash any removable parts in a dishwasher.
sections at least twice a year. Never use any type of metallic scouring pads, brushes, abrasive cleaners or strong
alkaline solutions on any surface. Do not wash any removable parts in a dishwasher.
Always unplug the electrical
power cord from the wall outlet before cleaning.
•
When moving the refrigerator, pull straight out. Do not shift the refrigerator from side to side as this
may tear or gouge the floor covering. If the refrigerator has an automatic ice maker, be careful not to
move the refrigerator beyond the plumbing connections.
may tear or gouge the floor covering. If the refrigerator has an automatic ice maker, be careful not to
move the refrigerator beyond the plumbing connections.
•
Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.
•
Never use CHLORIDE to clean stainless steel.
NOTES:
•
Turning the refrigerator temperature control to “0” turns off the compressor, but does not disconnect electrical
power to the light bulb or other electrical components. To turn off power to your refrigerator, you must unplug
the power cord from the wall outlet.
power to the light bulb or other electrical components. To turn off power to your refrigerator, you must unplug
the power cord from the wall outlet.
•
Do not use razor blades or other sharp instruments which can scratch the appliance surface when removing
adhesive labels. Any glue left from tape or labels can be removed with a mixture of warm water and mild
detergent, or, touch the glue residue with the sticky side of tape you have already removed. Do not remove the
serial plate.
adhesive labels. Any glue left from tape or labels can be removed with a mixture of warm water and mild
detergent, or, touch the glue residue with the sticky side of tape you have already removed. Do not remove the
serial plate.
Care & Cleaning Chart
Part
What To Use
Tips and Precautions
Interior/Door
Liner
Liner
•
Soap and water
•
Baking soda and water
Use 2 tablespoons of baking soda in 1 quart of warm water. Be sure to wring
excess water out of sponge or cloth before cleaning around controls,
light bulb or any electrical part.
excess water out of sponge or cloth before cleaning around controls,
light bulb or any electrical part.
Door Gaskets
•
Soap and water
Wipe gaskets with a clean soft cloth.
Drawers/Bins
•
Soap and water
Do not wash any removable items (bins, drawers, etc.) in dishwasher.
Glass Shelves
•
Soap and water
•
Glass cleaner
•
Mild liquid sprays
Allow glass to warm to room temperature before immersing in warm water.
Toe Grille
•
Soap and water
•
Mild liquid sprays
•
Vacuum attachment
Vacuum dust from front of toe grille. Remove toe grille (See illustration on
page 4). Vacuum backside and wipe with sudsy cloth or sponge. Rinse and
dry.
page 4). Vacuum backside and wipe with sudsy cloth or sponge. Rinse and
dry.
Exterior and
Handles
Handles
•
Soap and water
•
Non Abrasive Glass
Cleaner
Do not use commercial household cleaners, ammonia, or alcohol to clean
handles. Use a soft cloth to clean smooth handles. Do Not use a dry cloth to
clean smooth doors.
handles. Use a soft cloth to clean smooth handles. Do Not use a dry cloth to
clean smooth doors.
Exterior and
Handles
Handles
(Stainless Steel
Models Only)
Models Only)
•
Soap and water
•
Ammonia
•
Stainless Steel Cleaners
Never use CHLORIDE to clean stainless steel.
Clean stainless steel front and handles with non-abrasive soapy water and a
dishcloth. Rinse with clean water and a soft cloth. Wipe stubborn spots with an
ammonia-soaked paper towel, and rinse. Use a non-abrasive stainless steel
cleaner. These cleaners can be purchased at most home improvement or
major department stores. Always follow manufacturer's instructions.
NOTE: Always clean, wipe and dry with the grain to prevent cross-grain
scratching. Wash the rest of the cabinet with warm water and mild liquid
detergent. Rinse well, and wipe dry with a clean soft cloth.
dishcloth. Rinse with clean water and a soft cloth. Wipe stubborn spots with an
ammonia-soaked paper towel, and rinse. Use a non-abrasive stainless steel
cleaner. These cleaners can be purchased at most home improvement or
major department stores. Always follow manufacturer's instructions.
NOTE: Always clean, wipe and dry with the grain to prevent cross-grain
scratching. Wash the rest of the cabinet with warm water and mild liquid
detergent. Rinse well, and wipe dry with a clean soft cloth.