Frigidaire FGHF2344MF ユーザーズマニュアル

10



DO NOT remove the ground screw from hinge.



Use care while pulling the water tube from the 

unit to be sure you do not kink the tube.

1.  Trace lightly around the door’s top 

hinges with a pencil. This makes 

reinstallation easier.

2.  Disconnect the harness by grasping both 

sides of the connector firmly, depress the

latch, and pull apart.  Remove the two (2) 

screws from the top hinge. Lift the door 

off of the bottom hinge and set it aside. 

3.  Detach the water tube from the 

connector located behind the 

refrigerator and pull the tube back out 

to the front of the unit. The connector 

releases when you press inward on 

the outer sleeve while pushing the 

tube toward the connector then while 

continuing to hold in the sleeve, pull 

the tube away.

If your refrigerator will not fit through an

entrance area, you can remove the doors. 

Check first by measuring the entrance.
To prepare for removing the doors:

1.  Make sure the electrical power cord is 

unplugged from the wall outlet.

2.  Open the freezer drawer and remove 

the toe grille (see “Installation” section).

3.  Remove any food from the door 

shelves and close the doors.

1.  Remove the two (2) screws from each 

cover over the top door hinges.

2.  Lift inside edge of hinge cover and 

tilt back.