Frigidaire FGHN2844LF ユーザーズマニュアル

8

To adjust the flipper mullion:
  1  Loosen the screw located on the flipper

mullion hinge.

  2  Adjust flipper mullion height. For proper

connection with the flipper mullion guide,

there should be a separation about the 

thickness of a coin (0.060 inches, or 

1.5 mm) between the guide and flipper

mullion.

  3  Retighten screw.

  4  Lift the door while adjusting the washer. 

To raise the door, rotate washer clockwise 

(when viewed from the bottom). To lower 

door, rotate washer counterclockwise 

(when viewed from the bottom).

  5  Re-tighten the screw (where applicable), 

ensuring it is between the spokes of the 

washer. Screw will not be tight, just insert 

until it is flush with the hinge.



If after adjusting doors higher the door 

makes a popping/clicking sound, remove 

screw and replace with the longer one 

supplied in the handle package (select 

models).