Frigidaire FGHB2844LF5 ユーザーズマニュアル
29
CArE & CLEANING
Care and cleaning tips
Part
Cleaning Agents
Tips and Precautions
Interior &
Door Liners
Soap and water
•
Baking soda and
•
water
Use two (2) tablespoons of baking soda in one (1) quart of warm water.
•
Be sure to wring excess water out of sponge or cloth before cleaning around
•
controls, light bulb or any electrical part.
Door Gaskets
Soap and water
•
Wipe gaskets with a clean soft cloth.
•
Drawers &
Bins
Soap and water
•
Use a soft cloth to clean drawer runners and tracks.
•
Do not wash any removable items (bins, drawers, etc.) in dishwasher.
•
Glass Shelves
Soap and water
•
Glass cleaner
•
Mild liquid sprays
•
Allow glass to warm to room temperature before immersing in warm water.
•
Toe Grille
Soap and water
•
Mild liquid sprays
•
Vacuum
•
Remove toe grille (see Installation Instructions).
•
Vacuum both sides and wipe with sudsy cloth or sponge. Rinse and dry.
•
Exterior &
Handles
Soap and water
•
Non abrasive glass
•
cleaner
Do not use commercial household cleaners containing ammonia, bleach or
•
alcohol to clean handles.
Use a soft cloth to clean smooth handles.
Use a soft cloth to clean smooth handles.
•
Do not use a dry cloth to clean smooth doors.
•
Exterior &
Handles
(Stainless
Steel Models
Only)
Soap and water
•
Stainless steel
•
cleaners
Never use CHLORIDE or cleaners with bleach to clean stainless steel.
•
Clean stainless steel front and handles with non-abrasive soapy water and a
•
dishcloth. Rinse with clean water and a soft cloth.
Use a non-abrasive stainless steel
Use a non-abrasive stainless steel
•
cleaner. These cleaners can be purchased
at most home improvement or major department stores. Always follow
manufacturer’s instruction. Do not use household cleaners containing ammonia
or bleach.
NOTE: Always clean, wipe and dry with grain to prevent scratching.
NOTE: Always clean, wipe and dry with grain to prevent scratching.
•
Wash the rest of the cabinet with warm water and mild liquid detergent. Rinse
•
well and wipe dry with a clean soft cloth.
Ice Chute Extension
The ice chute extension is
designed to better direct ice
flow into containers.
Push Upward Until The
Extension Snaps In Place
Pull Down
Press Here
Firmly
removing the Ice Chute Extension For
Cleaning
1 Turn the refrigerator
off using the button
on the control panel
(refer to Owner’s
Manual).
2 Press inward firmly on
the front of the chute
and pull down.
3 Turn your refrigerator
back on.
Installing the Ice
Chute Extension
1 Turn the refrigerator off
using the button on the
control panel (refer to
Owner’s Manual).
2 Align the extension with
the ice chute so that the
snap clips are just inside
the front edge of the
chute.
3 Push upward until the extension snaps into place.
4 Turn your refrigerator back on.
4 Turn your refrigerator back on.