Frigidaire FFUS2613LE オーナーマニュアル

8

  1  Remove the two screws from each cover over the 

top door hinges.

  2  Lift hinge cover straight up and off.

  1  Detach the multi-wire cable connector located 

above the top hinge. Grasp both sides of the 

connector firmly and pull apart.

  3  Detach the water tube from the connector  

located below the freezer door. The connector 

releases when you press its outer sleeve inward.

  4  Remove the screws from the top hinge and  

pull the multi-wire cable through it. Lift the  

 

door off of the bottom hinge.

  5  Remove the two bottom hinge screws and  

 

hinge if necessary.

   6  Lay the door on its side to avoid damage to  

the water tube extending from the bottom  

 

hinge.

To reinstall the freezer door, reverse the above steps. 
Once both doors are in place, ensure they are aligned 

with each other and level (Please see “To level the doors 

using the lower hinge” for models with adjustable lower 

hinges or “To level the cabinet using the front rollers” 

for models with the non-adjustable lower hinges in the 

“Installation” section.), then replace the top hinge cover.

  2  Trace lightly around the hinge with a pencil.  

This makes reinstallation easier.