Frigidaire FGHB2869LE ユーザーズマニュアル

ページ / 34
30
CARE & CLEANING
Care and cleaning tips
Part
Cleaning Agents
Tips and Precautions
Interior & 
Door Liners
• Soap and water
• Baking soda and 
water
• Use two (2) tablespoons of baking soda in one (1) quart of warm water. 
• Be sure to wring excess water out of sponge or cloth before cleaning 
around controls, light bulb or any electrical part.
Door 
Gaskets
• Soap and water
• Wipe gaskets with a clean soft cloth.
Drawers & 
Bins
• Soap and water
• Use a soft cloth to clean drawer runners and tracks.
• Do not wash any removable items (bins, drawers, etc.) in dishwasher.
Glass 
Shelves
• Soap and water
• Glass cleaner
• Mild liquid sprays
• Allow glass to warm to room temperature before immersing in warm water.
Toe Grille
• Soap and water
• Mild liquid sprays
• Vacuum
• Remove toe grille (see Installation Instructions). 
• Vacuum both sides and wipe with sudsy cloth or sponge.  Rinse and dry.
Exterior & 
Handles
• Soap and water
• Non abrasive glass 
cleaner
• Do not use commercial household cleaners containing ammonia, bleach or 
alcohol to clean handles.
• Use a soft cloth to clean smooth handles. 
• Do not use a dry cloth to clean smooth doors.
Exterior & 
Handles 
(Stainless 
Steel Models 
Only)
• Soap and water
• Stainless steel 
cleaners
• Never use CHLORIDE or cleaners with bleach to clean stainless steel.
• Clean stainless steel front and handles with non-abrasive soapy water and a 
dishcloth. Rinse with clean water and a soft cloth.
• Use a non-abrasive stainless steel
 
cleaner. These cleaners can be purchased 
at most home improvement or major department stores. Always follow 
manufacturer’s instruction. Do not use household cleaners containing 
ammonia or bleach.
• NOTE: Always clean, wipe and dry with grain to prevent scratching.
• Wash the rest of the cabinet with warm water and mild liquid detergent. 
Rinse well and wipe dry with a clean soft cloth.
 
Ice Chute Extension
The ice chute extension is 
designed to better direct ice 
flow into containers.
Removing the Ice 
Chute Extension For 
Cleaning
  1  Turn the refrigerator 
off using the button 
on the control 
panel (refer to the 
“Controls” section of 
this Manual).
  2  Press inward firmly on
the front of the chute 
and pull down.
  3  Turn your refrigerator 
back on. 
Push Upward Until The
Extension Snaps In Place
Pull Down
Press Here
                   Firmly
Installing the Ice 
Chute Extension
  1  Turn the refrigerator off 
using the button on the 
control panel (refer to 
the “Controls” section of 
this Manual).
  2  Align the extension with 
the ice chute so that the 
snap clips are just inside 
the front edge of the chute.
  3  Push upward until the extension snaps into place.
  4  Turn your refrigerator back on.