Frigidaire FGHB2878LP ユーザーズマニュアル

8

To adjust the flipper mullion:
  1  Loosen the screw located on the flipper mullion

hinge.

  2  Adjust flipper mullion height. For proper

connection with the flipper mullion guide, there

should be a separation about the thickness of a 

coin (0.060 inches, or 1.5 mm) between the guide 

and flipper mullion.

  3  Re-tighten screw.

  4  Lift the door while adjusting the washer.  To raise 

the door, rotate washer clockwise (when viewed 

from the bottom).  To lower door, rotate washer 

counter-clockwise (when viewed from the bottom).

  5  Re-tighten the screw (where applicable), ensuring 

it is between the spokes of the washer.  Screw will 

not be tight, just insert until it is flush with the

hinge.



If after adjusting doors higher the door makes a 

popping/clicking sound, remove screw and replace with 

the longer one supplied in the handle package (select 

models).