Frigidaire FFTR1817LB ユーザーズマニュアル
5
NOTE
The direction in which your refrigerator doors open (door swing) can be reversed, from left to right or right to left, by
moving the door hinges from one side to the other. Reversing the door swing should be performed by a qualified person.
DOOr rEMOVAL INSTrUCTIONS
Adjustable
Wrench
Socket
Wrench Set
OR
Phillips Head
™
Tools Necessary:
3/8” Fixed
Wrench
AND
OR
Top Hinge
Cover Rear
Screw
Top Hinge
Cover Front
Screw
Bottom
Hinge
Screw
Top
Hinge
Screw
Door removal and reversal instructions:
1 Remove toe grille.
2 Remove top hinge cover. Trace around the hinge with a soft lead pencil. This
2 Remove top hinge cover. Trace around the hinge with a soft lead pencil. This
makes reinstallation easier. Remove top hinge and lift door off center hinge pin.
Set door aside.
3 Unscrew center hinge pin using adjustable wrench and save for reassembly.
Ensure plastic washer stays on hinge pin.
4 Lift refrigerator door off of bottom hinge and set aside.
5 Remove center hinge and shim by removing inside screw and loosening two
5 Remove center hinge and shim by removing inside screw and loosening two
outside screws enough to allow hinge and shim to slide out. Tighten screws.
6 Loosen two outside screws on opposite side of refrigerator, remove inside screw
and install center hinge.
7 Remove two screws on bottom hinge with 3/8” socket wrench.
8 Install bottom hinge on opposite side with the two screws removed from step 7.
9 Unscrew bottom hinge pin using adjustable wrench. Move hinge pin to other hole
8 Install bottom hinge on opposite side with the two screws removed from step 7.
9 Unscrew bottom hinge pin using adjustable wrench. Move hinge pin to other hole
in hinge and tighten with adjustable wrench.
10 Reverse door handles (see instruction on next page).
11 Move freezer and refrigerator door stops to opposite side. Before starting screws,
11 Move freezer and refrigerator door stops to opposite side. Before starting screws,
use an awl to puncture the foam.
12 Position refrigerator door onto bottom hinge pin and screw center hinge pin through
center hinge into top of door. Close refrigerator door to help align hinge hole.
13 Tighten center hinge pin with adjustable wrench.
14 Remove cabinet and hinge hole plugs and move to opposite side.
15 Lower freezer door onto center hinge pin.
16 Close freezer door. Have an assistant lift up on opposite side of door while
14 Remove cabinet and hinge hole plugs and move to opposite side.
15 Lower freezer door onto center hinge pin.
16 Close freezer door. Have an assistant lift up on opposite side of door while
tightening screws to install top hinge.
17 Flip toe grille and reinstall.
18 Plug in electrical power cord and turn refrigerator temperature control to center
18 Plug in electrical power cord and turn refrigerator temperature control to center
position. Adjust setting as necessary.
IMPORTANT
Before you begin, turn the refrigerator temperature control to “0” and remove the electrical power cord from the wall
outlet. Remove any food from door shelves.
Door
Stop
Door Stop
Screw
Hinge
Pin
Screws
Bottom
Hinge
Toe Grille
Washer
Top Hinge
Cover
Top Hinge