Frigidaire 241666500 ユーザーズマニュアル
17
CARE & CLEANING
Keep your beverage center clean to prevent odor build-up. Wipe up any spills immediately and clean both sections at least twice
a year. Never use any type of scouring pads, brushes, abrasive cleaners or strong alkaline solutions on any surface. Do not
wash any removable parts in a dishwasher.
a year. Never use any type of scouring pads, brushes, abrasive cleaners or strong alkaline solutions on any surface. Do not
wash any removable parts in a dishwasher.
Always unplug the electrical power cord from the wall outlet before cleaning.
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
•
When moving the beverage center, pull straight out. Do not shift the beverage center from side to side as this may
tear or gouge the floor covering. If the beverage center has an automatic ice maker, be careful not to move the
beverage center beyond the plumbing connections. DO NOT MOVE THE BEVERAGE CENTER WITH A KEG INSIDE.
tear or gouge the floor covering. If the beverage center has an automatic ice maker, be careful not to move the
beverage center beyond the plumbing connections. DO NOT MOVE THE BEVERAGE CENTER WITH A KEG INSIDE.
•
Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.
•
Never use CHLORIDE to clean stainless steel.
NOTE
NOTE
NOTE
NOTE
NOTE
•
Turning the beverage center temperature control to “0” turns off the compressor, but does not disconnect electrical power to
the light bulb or other electrical components. To turn off power to your beverage center, you must unplug the power cord
from the wall outlet.
the light bulb or other electrical components. To turn off power to your beverage center, you must unplug the power cord
from the wall outlet.
•
Do not use razor blades or other sharp instruments which can scratch the appliance surface when removing adhesive
labels. Any glue left from tape or labels can be removed with a mixture of warm water and mild detergent, or, touch the glue
residue with the sticky side of tape you have already removed. Do not remove the serial plate.
labels. Any glue left from tape or labels can be removed with a mixture of warm water and mild detergent, or, touch the glue
residue with the sticky side of tape you have already removed. Do not remove the serial plate.
Care & Cleaning Chart
Part
What To Use
Tips and Precautions
Interior/Door
Liner
Liner
•
Soap and water
•
Baking soda and water
Use 2 tablespoons of baking soda in 1 quart of warm water. Be sure to wring
excess water out of sponge or cloth before cleaning around controls,
light bulb or any electrical part.
excess water out of sponge or cloth before cleaning around controls,
light bulb or any electrical part.
Door Gaskets
•
Soap and water
Wipe gaskets with a clean soft cloth.
Drawers/Bins
•
Soap and water
Do not wash any removable items (bins, drawers, etc.) in dishwasher.
Toe Grille
•
Soap and water
•
Mild liquid sprays
•
Vacuum attachment
Vacuum dust from front of toe grille. Remove toe grille (See illustration on
page 4). Vacuum backside and wipe with sudsy cloth or sponge. Rinse and
dry.
page 4). Vacuum backside and wipe with sudsy cloth or sponge. Rinse and
dry.
Exterior and
Handles
Handles
•
Soap and water
Do not use commercial household cleaners, ammonia, or alcohol to clean
handles.
handles.
Exterior and
Handles
Handles
(Stainless Steel
Models Only)
Models Only)
•
Soap and water
•
Ammonia
•
Stainless Steel Cleaners
Never use CHLORIDE to clean stainless steel.
Clean stainless steel front and handles with non-abrasive soapy water and a
dishcloth. Rinse with clean water and a soft cloth. Wipe stubborn spots with an
ammonia-soaked paper towel, and rinse. Use a non-abrasive stainless steel
cleaner. These cleaners can be purchased at most home improvement or
major department stores. Always follow manufacturer's instructions.
NOTE: Always clean, wipe and dry with the grain to prevent cross-grain
scratching. Wash the rest of the cabinet with warm water and mild liquid
detergent. Rinse well, and wipe dry with a clean soft cloth.
dishcloth. Rinse with clean water and a soft cloth. Wipe stubborn spots with an
ammonia-soaked paper towel, and rinse. Use a non-abrasive stainless steel
cleaner. These cleaners can be purchased at most home improvement or
major department stores. Always follow manufacturer's instructions.
NOTE: Always clean, wipe and dry with the grain to prevent cross-grain
scratching. Wash the rest of the cabinet with warm water and mild liquid
detergent. Rinse well, and wipe dry with a clean soft cloth.
Condenser
Coils
(Fan-cooled
models only)
Coils
(Fan-cooled
models only)
•
Condenser Cleaning
Brush is available from
your dealer.
Brush is available from
your dealer.
•
Vacuum Cleaner
No need to clean unless operating
beverage center under particularly dusty or
greasy conditions, or if there is significant pet traffic in your home. If cleaning
is necessary, remove toe grille and use extended vacuum attachment and
condenser cleaning brush to remove dust build-up from condenser coils (see
item “J” in illustration on page 16 for location).
is necessary, remove toe grille and use extended vacuum attachment and
condenser cleaning brush to remove dust build-up from condenser coils (see
item “J” in illustration on page 16 for location).
Condenser
Coils
(Air-cooled
models only)
Coils
(Air-cooled
models only)
•
Vacuum Cleaner
Use the dusting tool attachment on your vacuum to remove dust build-up on
the condenser coils (black tubes and wires) attached to the back of air-cooled
beverage center only.
the condenser coils (black tubes and wires) attached to the back of air-cooled
beverage center only.
Defrost Water
Pan
Pan
•
Soap and water
Some models have defrost water pan located on top of compressor at bottom
rear of
rear of
beverage center (see illustration on next page). Wipe water pan with
damp cloth. NOTE: The defrost water pan is NOT removable.