Frigidaire 241856001 ユーザーズマニュアル

5

If it is necessary to move the refrigerator through narrow doorways, follow these steps to
remove the doors.
Before you start:
  1  Make sure the electrical power cord is unplugged from the wall outlet.
  2  Remove any food from the door shelves.
  3  Close the doors.
to remove the hinge cover: (some models)
  1  Remove the three screws from the cover over the top door hinges.
  2  Pull the cover forward about a half inch and lift it off.
to remove the refrigerator door:
  1  Remove top hinge cover screw on refrigerator door and remove cover. (some models)
  2  Trace lightly around the door’s top hinge with a pencil. This makes reinstallation

easier.

  3  Remove the two screws from the top hinge. Lift the door off of the bottom hinge and

set it aside.

  4  Remove the three bottom hinge screws and hinge, if necessary.
to remove the freezer door:
  1  Detach the multi-wire cable connector located above the top hinge. Grasp both sides

of the connector firmly and pull apart.

  2  Remove top hinge cover screw on freezer door and remove cover. (some models)
  3  Trace lightly around the door’s top hinge with a pencil. This makes reinstallation

easier.

  4  Detach the water tube from the connector located below the freezer door. The

connector releases when you press its outer sleeve inward.

  5  Remove the screws from the top hinge and pull the multi-wire cable through it.
  6  Lift the door off of the bottom hinge. Lay the door on its side to avoid damage to the

Remove the three bottom hinge screws and hinge, if necessary.

To reinstall the refrigerator and freezer doors, reverse the above steps.

Adjustable

Wrench

Socket

Wrench Set

Phillips  head

and

Flat Head

Screw Driver

™

3/8”

Fixed
Wrench

Top Hinge

Cover Screw

Bottom

Hinge

Screw

Top

Hinge

Screw

1. Press outer ring against face
of fitting

2. Pull to
remove tube

Insert tube and
push until mark touches face of fitting

7/16”
and