GE ZICP720 ユーザーズマニュアル
INSTALL CENTER TRIM STRIP
• Open doors fully.
• The case trims should be evenly aligned top to
bottom with a slight gap between them.
• Starting at the top, press center trim strip (D) over the
inside case trims of both refrigerators.
• Continue pressing trim until you reach the bottom of
the case trims. The trim should align with the top and
bottom of case trims.
bottom of case trims.
11
13
Installation Instructions
Case Trim
U-Shape
Trim
ADJUST DOOR SWING
NOTE: This refrigerator has a 2-position door stop.
When space does not allow the door to swing open
fully to 130°, you may change the door swing to
a 90° opening. Skip this step if door opening is
satisfactory for your installation situation.
When space does not allow the door to swing open
fully to 130°, you may change the door swing to
a 90° opening. Skip this step if door opening is
satisfactory for your installation situation.
• Lift the grille panel to access the door stop.
• Use pliers to unscrew door stop and reinstall
into the 90° position.
12
Pin Location
For 90°
Door Swing
Pin Location
as Shipped
For 130°
Door Swing