Electrolux EI24BC65GS ユーザーズマニュアル

This model comes equipped with a right-hand (RH) 
swing door.  To convert the unit to a left-hand (LH)
swing door (as shown in the Use & Care Guide), 
certain components must be obtained before 
beginning the conversion.  These components 
are available from your local dealer or by calling 
Electrolux.  

 

1   Disconnect power to the wine cooler / 

beverage center.

 

2   Remove toe grille.

 

3  Disconnect door harness from connector 

bracket behind lower front panel.  Pull 
harness from behind lower front panel so it is 
hanging below the door.

 

4  Remove upper RH hinge bracket by 

loosening four (4) screws.  Be careful to 
support the door while loosening and 
removing the upper hinge bracket.

 

5  Lift the door off of the lower RH hinge 

bracket.  Turn the door upside down and 
place on a soft, non-abrasive surface.