Electrolux ENB35405 S ユーザーズマニュアル

electrolux 15

External components:

7. Dispenser

8. Water Lever

9. Water drop tray

1. Remove every tape and other
protection system from the tank
assembly;

2. Clean the components as described
into the WATER DISPENSER
CLEANING PROCEDURE chapter in
order to remove eventual residues;

1. Unblock the two stopping elements
on the sides of the tank as shown in the
pictures;

- Take out the BRITA MAXTRA cartridge
from the water filter unit

- Press the stopping elements in the
middle and move it up.

- Move the stopper into direction of the
central tank

2. Push up the tank along the direction
of the Valve

3. Remove the lid and the funnel

4. Unscrew the valve in counter
clockwise (pay particular attention to
lose the Valve Gasket because is
necessary to a correct functioning of
the features);

5. Clean the tank lid, the valve and the
gasket with a solution of warm water
and neutral soap. Rinse it and put it
inside the door hole during the cleaning
of the other components (in order to
avoid cold air leakage from the fridge);

6. Clean the tank and funnel into the
dishwasher or with a solution of warm
water and neutral soap and rinse them;

7. After the tank components cleaning
take back the valve from the fridge door
and assembly the tank in the inverse
order (4;3;2;1) of disassembly (pay
attention at the valve gasket
positioning);

8. Put the tank assembled on the door
along the valve direction;

9. Block the stopping elements in the
inverse order of unblock;