Electrolux 241857202 ユーザーズマニュアル

ページ / 13
8
Freezer Control (some models)
Refrigerator Control
(some models)
COOL DOWN PERIOD
To ensure safe food storage, allow the refrigerator to operate
with the doors closed for at least 8 to 12 hours before loading it
with food.
REfRIGERATOR & fREEzER CONTROLS
TEMPERATURE ADjUSTMENT
 •
Adjust temperature gradually: move the knob in 
small increments, allowing the temperature to 
stabilize.
 •  For colder temperatures, turn the knob towards
Colder.
 •  For warmer temperatures, turn the knob towards
Cold.
Turning the refrigerator control will change temperatures in both
compartments. For example, if the refrigerator control is turned
to a colder setting, the freezer control may have to be adjusted
to a warmer setting. Turning the freezer control will change only
the freezer temperature.
To maintain temperatures, a fan circulates air in the refrigerator
and freezer compartments. For good circulation, do not block
cold air vents with food items.
Refrigerator & Freezer Control (some models)
TEMPERATURE CONTROLS
TEMPERATURE ADjUSTMENT GUIDE
If Refrigerator compartment Is Too Warm
Turn Refrigerator Control Slightly Towards
Colder.
If Refrigerator compartment Is Too Cold
Turn Refrigerator Control Slightly Towards
 Cold.
If freezer compartment Is Too Warm
Turn Freezer Control Slightly Towards
Colder.
If freezer compartment Is Too Cold
Turn Freezer Control Slightly Towards
Cold.
* To Turn Refrigerator Off
Turn Refrigerator Control To
 0.
NOTE
When making changes to the temperature controls, wait 24
hours for the temperature to stabilize before making additional
changes.
IMPORTANT
Turning the refrigerator temperature control to “0” turns off
the compressor and prevents the refrigerator from cooling,
but does not disconnect the power to the light bulb and other
electrical components. To turn off power to your refrigerator,
you must unplug the power cord from the wall outlet.
NOTE
When first turning refrigerator on, move refrigerator and
freezer controls to
Normal. This is the recommended initial
setting. After 24 hours, adjust the controls as needed.