Elkay ERW20-1C プリント

97644C (Rev. B - 2/04)

NOTICE:  This water cooler must be connected to the water

supply using a dielectric coupling.

   

It is important to insure proper ventilation.  Allow a

minimum clearance of 12 inches (305 mm) in front and 3 inches

(76mm) in the rear of the unit.  If unit is to be installed in an

enclosure, allow the following clearances around unit - 1 inch

(25mm) each side, 3 inches (76mm) in the rear, 3 inches

(76mm) above wall.

This chiller has been designed for use with potable water and

includes an o-ring seal on the drain plug.  The fitting should

be replaced if the unit is to be used with more aggressive

fluids.

For use with photo processing applications, adjust

cold control to warmer settings.