Maytag MSD2559XEM ユーザーズマニュアル

When you use the dispenser, the light will automatically turn on. 
If you want the light to be on continuously, you may choose either 
ON or DIM. The display screen indicates which mode is selected. 

ON: Press LIGHT to turn the dispenser light on. 

DIM: Press LIGHT a second time to select DIM mode. The 
dispenser light will remain on, but at a lower intensity.

OFF: Press LIGHT a third time to turn the dispenser light off.

The dispenser lights are LEDs that cannot be changed. If it 
appears that your dispenser lights are not working, see 
“Troubleshooting” for more information.

The Dispenser Lock 

The dispenser can be turned off for easy cleaning or to avoid 
unintentional dispensing by small children and pets. 

NOTE: The lock feature does not shut off power to the 
refrigerator, to the ice maker, or to the dispenser light. It simply 
deactivates the controls and dispenser levers. To turn off the ice 
maker, see “Ice Maker and Storage Bin.”

■

Press and hold LOCK for 3 seconds to lock the dispenser. 

■

Press and hold LOCK a second time to unlock the dispenser.

The display screen indicates when the dispenser is locked. 

The On/Off switch is located on the top right-hand side of the 
freezer compartment.

■

To turn on the ice maker, slide the control to the ON (left) 
position.

■

To manually turn off the ice maker, slide the control to the 
OFF (right) position.

NOTE: Your ice maker has an automatic shutoff. The ice maker 
sensors will automatically stop ice production, but the control will 
remain in the ON (left) position.

■

Allow 24 hours to produce the first batch of ice. Discard the 
first three batches of ice produced.

■

The quality of your ice will be only as good as the quality of 
the water supplied to your ice maker. Avoid connecting the 
ice maker to a softened water supply. Water softener 
chemicals (such as salt) can damage parts of the ice maker 
and lead to poor quality ice. If a softened water supply cannot 
be avoided, make sure the water softener is operating 
properly and is well maintained.

■

Do not use anything sharp to break up the ice in the storage 
bin. This can cause damage to the ice container and the 
dispenser mechanism.

■

Do not store anything on top of or in the ice maker or storage 
bin.

1. Hold the base of the storage bin with both hands and press 

the release button to lift the storage bin up and out.

NOTE: It is not necessary to turn the ice maker control to the 
OFF (right) position when removing the storage bin. The 
sensor cover (“flipper door”) on the left wall of the freezer 
stops the ice maker from producing ice if the door is open or 
the storage bin is removed.

2. Replace the storage bin on the door and push down to make 

sure it is securely in place.

The water filter status light will help you know when to change 
your water filter. 

■

When the dispenser control panel’s water filter status display 
changes to “ORDER,” this tells you that it is almost time to 
change the water filter cartridge. 

■

Replace the water filter cartridge when the water filter status 
display changes to “REPLACE.” 

If water flow to your water dispenser or ice maker decreases 
noticeably, change the filter sooner. The filter should be replaced 
at least every 6 months, depending on your water quality and 
usage.

■

After changing the water filter, reset the status light by 
pressing and holding the FILTER button for 3 seconds. When 
the system is reset, the “ORDER” and “REPLACE” icons will 
disappear from the display screen.

Do not use with water that is microbiologically unsafe or of 
unknown quality without adequate disinfection before or 
after the system.