Amana 8113P515-60 ユーザーズマニュアル

Oven Cooking

NOTE: The display will show 12:00 when the appliance is first connected to power or if power is interrupted. The Bake and Broil
indicators light when function is pressed.

1. Press the Clock pad.

• The clock time cannot be set if the control

is programmed for a bake, broil or timing
operation.

2. Set the correct time of day using the 

▲ or ▼ pads. If the

▲ or ▼ pad is not pressed within 30 seconds, the program
will cancel. Press the Clock pad and begin again.

The timer can be set from one minute (:01) up to 99 hours
and 59 minutes (99:59). Time will be displayed in minutes and
not in seconds. THE TIMER DOES NOT CONTROL THE
OVEN.

1. Press the Timer pad.

• 0:00 will light and the colon (:) will flash in

the display.

2. Press the 

▲ or ▼ pad until the desired time is displayed.

• The timer will begin as soon as the time is set.

• The flashing colon indicates that a timing operation is in

progress. (The colon will not flash if the time of day or
oven temperature is displayed.)

• Two short beeps signal the end of the operation. “0:00”

will appear in the display.

• If desired, press the Clock pad and the time of day will

briefly reappear in the display during a timing operation.

• If desired, press the Bake or Broil pads and the current

temperature setting will briefly reappear in the display
during a timing operation.

Press and hold the Timer pad for several seconds.

(select models)

• Press the desired pad.

• Press the 

▲ or ▼ pad to enter time or temperature.

• A beep will sound each time a function pad is pressed. There

is no beep for the 

▲ or ▼ pad.

• A double beep will sound if a programming error occurs.

Bake

Use for baking and roasting.

Broil

Use for broiling and top browning.

Timer

Sets timer.

Clock

Use to set time-of-day clock.

Cancel

Cancels all operations except timer
and clock.

▲ (More) or

Enters or changes time, oven

▼ (Less)

temperature.  Sets HI or LO broil.

Note:  Four seconds after pressing the 

▲ or ▼ pad, the

time or temperature will automatically be entered.  If more
than 30 seconds elapse between touching a function pad
and the 

▲ or ▼ pad, the function will be canceled and the

display will return to the previous display.