Amana W10533015A オーナーマニュアル

Electric igniters automatically light the surface burners when 
control knobs are turned to LITE.

Before setting a control knob, place filled cookware on the grate. 
Do not operate a burner using empty cookware or without 
cookware on the grate.

1. Push in and turn knob counterclockwise to LITE.

All four surface burners and the oven burner will click. Only 
the burner with the control knob turned to LITE will produce a 
flame.

2. Turn knob to anywhere between HI and LO. The clicking will 

stop. Use the following chart as a guide when setting heat 
levels.

1. Push in and turn oven control knob counterclockwise to LITE.

2. Look through the hole in the oven bottom to verify that the 

pilot inside the cavity is lit.

3. Turn the oven control knob to the desired temperature 

setting.

In case of prolonged battery failure, the surface burners can be lit 
manually. Hold a lit match near a burner and turn knob 
counterclockwise to LITE. After burner lights, turn knob to 
setting.

IMPORTANT: Do not obstruct the flow of combustion and 
ventilation air around the burner grate edges.

Burner cap: Always keep the burner cap in place when using a 
surface burner. A clean burner cap will help avoid poor ignition 
and uneven flames. Always clean the burner cap after a spillover 
and routinely remove and clean the caps and bases according to 
the “General Cleaning” section.

■

Light the burner.

■

Start food cooking.

■

Bring liquid to a boil.

■

Hold a rapid boil.

■

Quickly brown or sear food.

■

Fry or sauté foods.

■

Cook soups, sauces and gravies.

■

Stew or steam foods.

■

Keep food warm.

■

Simmer.

A

B

C

D

E