Frigidaire FGEF304DKW ユーザーズマニュアル

18

Í

The surface elements cannot be activated when the 

Lockout feature is active (see the section: The electronic 

surface element control (ESEC)).

The 

 pad controls the Lockout feature. The Lockout 

feature automatically locks the oven doors, the control 

panel and the cooktop. It does not disable the Minute 

Timer or the interior oven lights.
To activate the Lockout feature

1.  Press and hold 

 for 3 seconds.

2.  After 3 seconds “Loc” and “Control” will appear, a 

beep will sound, “UPPER”, “LOWER” and “DOOR” will 

fl ash in the display. Once the oven door is locked the 

“DOOR” will stop fl ashing and remain on along with 
the “Loc”, “Control” and the   icon will appear.

1.  Press and hold 

 for 3 seconds. A beep will sound. 

The “UPPER”, “LOWER” and “DOOR” will fl ash in the 

display until the oven door has completely unlocked and 
the   icon will disappear.

2.  The unit is again fully operational.

The TIMER ON.OFF pad controls the Minute Timer feature. 

The Minute Timer serves as an extra timer in the kitchen 

that will beep when the set time has run out. It does not 

start or stop cooking. The Minute Timer feature can be 

used during any of the other oven control functions. Refer 

to “Minimum and Maximum Control Pad Settings” for time 

amount settings.

To set the Minute Timer (example for 5 minutes)
1. Press TIMER ON.OFF.  “-- --” will appear in the 

display.

2.  Use the number pads to set the desired time in the 

display; press 5.

3. Press 

START. The time will begin to count down with 

“5:00” in the display.

Note: If START is not pressed the timer will return to the 

time of day after 25 seconds.

4.  When the set time has run out, “End” will show in 

the display. The clock will sound with 3 beeps every 5 

seconds until TIMER ON.OFF is pressed.

1. Press 

TIMER ON.OFF. The display will return to the time 

of day.

The ADD 1 MINUTE pad is used to set the Add 1 Minute 

feature. When the ADD 1 MINUTE pad is pressed, 1 

minute is added to the Minute Timer feature if this feature 

is already active. If the Minute Timer feature is not active 

and the ADD 1 MINUTE pad is pressed, the Minute Timer 

feature will become active and will begin counting down 

from 1 minute.

The  DELAY START and SELF CLEAN pads control the 

Silent Control operation feature. The Silent Control operation 

feature allows the oven control to be operated without 

sounds or beeps whenever necessary. If desired the control 

can be programmed for silent operation and later returned 

to operating with all the normal sounds and beeps.

1.  To tell if your range is set for normal or silent operation 

press and hold DELAY START. “-- --” will appear and 

“DELAY” will fl ash in the display. After 6 seconds “bEEP 

On” or “bEEP OFF” will appear in the display.

2. Press SELF CLEAN to switch between normal sound 

operation and silent operation mode. The display will 

show either “bEEP On” or “bEEP OFF”.

Note: If “bEEP On” appears, the control will operate with 

normal sounds and beeps.  If “bEEP OFF” appears, 

the control is in the silent operation mode.

3. Press 

START to accept the change or press CANCEL 

to reject the change.

Note: The control will always beep at the end of a minute 

timer and will beep when a set temperature has been reached, 

even if the control is set to silent operation.