Electrolux Gas hob ユーザーズマニュアル

14

Connection to the gas supply 
should be with either rigid or semi-
rigid pipe, i.e. steel or copper.

The connection should be suitable 
for connection to RC ½ (½ BSP 
male conical thread).

When the final connection has been 
made, it is essential that a thorough 
leak test is carried out on the hob 
and installaion.

Ensure that the main connection 
pipe does not exert any strain on 
the hob.

          It is important to install the 
          elbow correctly, with the 
          shoulder on the end of the 
          thread, fitted to the hob 
          connection pipe.

          Failure to ensure to correct 
          assembly will cause leakage 
          of gas.

The unit should be pressure-tested 
at Max. 150 mbar.