Electrolux Gas hob ユーザーズマニュアル

ページ / 24
19
Something not working
If the hob is not working correctly, please carry out the following checks before 
contacting your local AEG Service Force Centre.
IMPORTANT: If you call out an engineer to a fault caused by incorrect use or 
installation, a charge will be made even if the hob is under guarantee.
If after all these checks, your hob still does not operate correctly, contact your 
local AEG Service Force Centre.
In-guarantee customers should ensure that the above checks have been made as 
the engineer will make a charge if the fault is not a mechanical or electrical 
breakdown.
Please note that it will be necessary to provide proof of purchase for any in-
guarantee service calls.
Sympton:
There is no spark when lighting the 
gas
When the operating knob is released 
the gas ring goes out again
The gas ring burns unevenly
Solution
Check hob is connected to the 
electricity supply. Check the fuse and 
replace if necessery.
The operating knob has not been 
depressed long enough, or has not 
been depressed sufficiently.
Ensure the cover has been replaced 
correctly, e.g. after cleaning.