KitchenAid KDRP407H ユーザーズマニュアル

ページ / 80
2. Remove glass light cover by grasping the
front edge of cover and pulling it away
from the side wall of the oven.
3. Remove the light bulb from its socket.
Replace the bulb with another halogen
bulb (12 volt, 5 watt maximum, available
at most hardware stores).
4. Replace the light cover by snapping it
back into wall. 
5. Plug in oven or reconnect power.
U
sing and 
C
aring for 
Y
our 
Oven
Using and replacing
the oven lights
The oven lights will come on when you open
the oven door or when any function (other
than CLEAN and PROOF) is selected.
NOTES:
Make sure the oven is cool before 
replacing the light bulb.
The oven lights will not work during the
Self-Cleaning or Proof cycles.
Replacing the oven light:
1. Unplug oven or disconnect power. 
26
Cleaning Stainless Steel Surfaces
 Do not use steel wool or soap-filled scouring pads.
 Rub in the direction of the grain line to avoid marring the surface.
 Always wipe dry to avoid water marks.
 KitchenAid
™ 
Professional Formula Stainless Steel Cleaner & Polish is the cleaner 
   recommended for cleaning stainless steel surfaces on this product. To order, call our 
  Factory Parts and Accessories Center at 1-800-442-9991, or order on-line at 
   www.applianceaccessories.com and ask for part number 8171420. 
 If commercial cleaners are used, follow label directions. If product contains chlorine 
   (bleach), rinse thoroughly and dry with a soft, lint-free cloth. Chlorine is a corrosive 
   substance.
CLEANING AGENT
Routine cleaning 
and fingerprints
Liquid detergent soap and 
water, all-purpose cleaner
Wipe with damp cloth or sponge, 
then rinse with clean water and 
wipe dry.
Stubborn stains 
and baked-on 
residue
Mild abrasive cleanser or 
stainless steel cleaners
Rub in the direction of grain lines 
with a damp cloth or sponge and 
cleaner. Rinse thoroughly. 
Repeat if necessary. 
Hard water spots
Vinegar
Swab or wipe with cloth. Rinse 
with water and dry.
HOW TO USE
4452761Av04c52  1/11/00  8:18 AM  Page 26