Smeg SY4110 ユーザーズマニュアル
Instructions for the User
27
16.3 Removing the door (multifunction oven)
Open the door completely and, with the aid of a fine-cut screwdriver, turn hinges A completely (as shows
in figures 1, 2, 3). Hold the door on both sides with both hands close to the hinges, stop when the door is
at an angle of about 45° and remove it. To replace the door, insert slots B in the oven housings and put
hinges A back into their position (as illustrated in the figure) with a push and the help of a screwdriver or
any suitable tool until a click is heard.
in figures 1, 2, 3). Hold the door on both sides with both hands close to the hinges, stop when the door is
at an angle of about 45° and remove it. To replace the door, insert slots B in the oven housings and put
hinges A back into their position (as illustrated in the figure) with a push and the help of a screwdriver or
any suitable tool until a click is heard.
16.4 Removing the door seal
To permit thorough cleaning of the oven, the seal may be removed.
Before removing the seal, take off the door as described above. Once the
door has been taken off, lift the tabs at the corners as shown in the figure.
Before removing the seal, take off the door as described above. Once the
door has been taken off, lift the tabs at the corners as shown in the figure.