Furuno FR-8125 ユーザーズマニュアル
1. OPERATION
1-6
1.6
Tuning
In default, the radar receiver can be tuned automatically after you set the radar to TX.
If you require fine tuning in manual, do the following:
1. Transmit the radar and select the maximum range with the RANGE key.
2. Press the MENU key to open the menu.
3. Use S or T to select [Tuning] and press the ENTER key.
2. Press the MENU key to open the menu.
3. Use S or T to select [Tuning] and press the ENTER key.
Tuning menu
4. Use S or T to select [Tuning Mode] and press the ENTER key.
Tuning Mode options
5. Use S or T to select [Manual] and press the ENTER key.
6. Use S or T to select [Manual Tuning] and press the ENTER key.
6. Use S or T to select [Manual Tuning] and press the ENTER key.
Manual Tuning setting window
7. Use S or T to adjust the tuning while you look at the tuning bar in the upper-right
corner of the display. The best tuning point is where the tuning bar moves to a
maximum value. The vertical bar on the tuning bar shows the tuning voltage.
maximum value. The vertical bar on the tuning bar shows the tuning voltage.
8. Press the ENTER key.
9. Press the MENU key to close the menu.
9. Press the MENU key to close the menu.
Note: If the automatic tuning does not give the correct tuning, run the [Tuning Init Ad-
just] again.
just] again.
[ENTER]: Enter
[MENU] Exit
[MENU] Exit
[CANCEL/HL OFF]: Back
Menu
Tuning
Tuning Mode
: Auto
Manual Tuning
: 6.00V
Tuning Init Adjust
Brill/Color
Display
Echo
Custom 1
Custom 2
Custom 3
Alarm
Target Trails
Display
Echo
Custom 1
Custom 2
Custom 3
Alarm
Target Trails
Tuning
Others
Target
Target
Choosing a tuning mode
Auto
Manual
TUNE MAN
Tuning method (Manual)
Tuning bar
Tuning bar
Vertical bar