Furuno FR-8125 ユーザーズマニュアル

1.  OPERATION

You can off-center your ship position to expand the view field without selecting a larger 
range scale. The display can be off-centered manually, or automatically according to 
speed of the ship.

Note: Off-centering is not available in the true motion mode and the 64 NM range 
scale or higher.

1. Press the MENU key to open the menu.
2. Use S or T to select [Display] and press the ENTER key.
3. Use S or T to select [Offcenter Mode] and press the ENTER key.

4. Use S or T to select [Manual], [Custom] or [Auto] then press the ENTER key. 

Press the ENTER key to change between on and off.

5. After setting all options, use the T to select [EXIT? YES] and press the ENTER 

key.

6. Press the MENU key to close the menu.

Press the OFF CENTER key to move your ship position. When you press the OFF 
CENTER key continuously, the mode changes in the sequence of OFF 

→ Manual → 

Custom 

→ Auto → OFF → Manual → ... (the options available depend on setting se-

lected at step 4 in section 1.20.1). When off-centering is active, "OFFCENT(M)", 
"OFFCENT(C)" or "OFFCENT(A)" appears at the upper-left corner on the display.

You can move your ship position to the current cursor position on all modes except 
true motion, within 75% of the available display area.

1. Press the OFF CENTER key several times until the off-center indication disap-

pears.

2. Put the cursor in the position to off-center the display.
3. Press the OFF CENTER key several times until the indication "OFFCENT(M)" ap-

pears.

Manual

Custom
Auto

EXIT? YES

On

Off
Off

Press the ENTER key
to change between
on and off.