Furuno FR-8125 ユーザーズマニュアル

Connected to the FURUNO AIS Transponders FA-150, FA-100, FA-50 or the AIS Re-
ceiver FA-30, the FR-8045/FR-8065/FR-8125/FR-8255 series can show the name, 
position and other navigation data of the nearest 100 AIS transponder-equipped 
ships.

This radar accepts heading and position data fixed by WGS-84 geodetic datum. Set 
the datum to WGS-84 on the GPS navigator connected to this radar. If this radar is 
connected with the FURUNO GPS Navigator GP-320B, see section 5.2 for the proce-
dure.

ENTER: Activate the cursor-selected target. Display data for the selected active target 
(in the data box at the bottom of the screen).

CANCEL/HL OFF: Remove data of cursor-selected AIS target from the data box. 
Sleep the cursor-selected target (when its data is not displayed in the data box).

MENU: Access the [Target] and [AIS] menus for AIS operations.

CursorPad: Select a target to activate (or sleep). Select a target to show (or remove) 
target data.

You can turn the AIS display on or off. The system continues processing AIS targets 
regardless of on/off for AIS display when the AIS transponder is turned on.

1. Press the MENU key to open the menu.
2. Use S or T to select [AIS] and press the ENTER key.

Custom 1
Custom 2
Custom 3
Alarm
Target Trails
Tuning
Others
Target
ARPA

AIS

GPS

Color
Number of Targets
Sort By

Sector End

: Green
: 30
: Range
: 24.0NM

Sector Start

: 340°

Range

Ignore Slow Targets

ACK Lost Targets

:   20°
: 5.0kn

Display

: On

[ENTER]: Enter
[MENU]: Exit

[CANCEL/HL OFF]: Back

Turning on/off AIS display