Omron BUM100S ユーザーズマニュアル
14
6.
Securely connect the connectors.
➀
Secure the connectors to the plate cover.
➁
You may hear a “pop” sound when you connect the battery if it is replaced after the unit’s
operation is stopped, but this sound is not abnormal.
operation is stopped, but this sound is not abnormal.
If you cannot secure a connector to the plate cover, the connector is not completely
connected.
Connect the connector again.
connected.
Connect the connector again.
2
Use the 2 supports at
the top and bottom of
the plate cover to secure
the connectors.
the top and bottom of
the plate cover to secure
the connectors.
1
7.
Attach the front panel.
Push the front panel toward the main body.
➀
Use a screwdriver to securely tighten (clockwise) the 4 screws at the top of the front panel.
➁
Battery replacement is now complete.
Tighten the 4 screws.
1
BATTRY UNIT
BATTRY UNIT
2