Philips BDL3245E ユーザーズマニュアル

BDL3245E / BDL4245E / BDL4645E

20

Film mode
Choose to turn on or off the film mode frame conversion function.
•  {Auto} - Enable the film mode frame conversion function for 

movies and motion pictures. The display converts a 24 frames-per-

second (24 fps) input signal format to DVD video signal format. 

Once this function is enabled, it is recommended that you set the 

{Scan conversion} function to {Progressive}.

•  {Off} - Disable the film mode frame conversion function. This mode 

is suitable for TV broadcasting and VCR signals.

IR control
Select the operation mode of the remote control when multiple 

displays are connected via the RS232C connection.
•  {Normal} - All displays can be operated normally by the remote 

control unit.

•  {Primary} - Designate this display as the primary display for remote 

control operation. Only this display can be operated by the remote 

control.

•  {Secondary} - Designate this display as the secondary display. This 

display can not be operated by the remote control, and will only 

receive the control signal from the primary display via the RS232C 

connection.

•  {Lock All} / {Lock all but Volume} / {Lock all but Power} - Lock the 

remote control function of this display. To unlock, press and hold the 

[DISPLAY] button on the remote control for 5 (five) seconds..

Keyboard control
Choose to enable or disable the display keyboard (control buttons) 

function.
•  {Lock} - Disable the keyboard function.
•  {Lock All} / {Lock all but Volume} / {Lock all but Power} - Disable
•  the keyboard function.
Tiling
With this function you can create a single large-screen matrix (video 

wall) that consists of up to 25 sets of this display (up to 5-set each at 

the vertical and horizontal side). This function requires a daisy-chain 

connection.

Tiling

H monitors
V monitors
Position
Frame comp.
Enable
Switch on delay

1
1
1

No
No
Off

Example: 2 x 2 screen matrix (4 displays)

H monitors = 2 displays 

V monitors = 2 displays

H monitors

V monitors

Position

Example: 5 x 5 screen matrix (25 displays)

H monitors = 5 displays 

V monitors = 5 displays

H monitors

V monitors

Position

•  H monitors - Select the number of displays on the horizontal side.
•  V monitors - Select the number of displays on the vertical side.
•  Position - Select the position of this display in the screen matrix.
•  Frame comp. - Choose to turn the frame compensation function on 

or off. If turned on, the display will adjust the image to compensate 

for the width of the display bezels in order to accurately display the 

image.