Milwaukee MW600 ユーザーズマニュアル
BATTERY REPLACEMENT:
When the battery becomes weak the
meter will display the low battery
indicator "
meter will display the low battery
indicator "
".
When this appears, only a few hours
of battery life remain. A low battery will
result in unreliable measurements.
Prompt battery replacement is required.
of battery life remain. A low battery will
result in unreliable measurements.
Prompt battery replacement is required.
Battery replacement must take place
in a non-hazardous area using an
alkaline 9V battery.
in a non-hazardous area using an
alkaline 9V battery.
Turn the meter off, slide the battery
compartment cover located at the rear
of the meter off and replace the 9V
battery with a new one. Make sure
the battery contacts are fully engaged
in the connector, seat the battery in its
compartment and replace the cover.
compartment cover located at the rear
of the meter off and replace the 9V
battery with a new one. Make sure
the battery contacts are fully engaged
in the connector, seat the battery in its
compartment and replace the cover.
9
OPTIONAL ACCESSORIES:
MA9070
Zero Oxygen calibration solution, 220 mL
MA 9071
Refilling Electrolyte solution, 220 mL
MA841
Spare membrane, 5 pcs
MA840
D.O. probe