IBM 1000-90 ユーザーズマニュアル

ページ / 22
8
COMM.EXE
The data dump can be aborted by pressing the 
OUT
 key again.
LI-1400 DataLogger
The LI-1400 is configured as a DTE device.  Most computers can be
connected to the LI-1400 using the 1400-550 printer cable.  To send
files from the LI-1400 to a computer, follow these steps:
1.
Use the Setup Hardware menu to set the Printing baud rate to
9600.
2.
Use the Setup Logging menu to make sure that Auto Print=No.
3.
Press the 
Fct
 key.
4.
Press the right or left arrow key until 'Print Memory' is
displayed.  Press 
Enter
.
5.
Press the right or left arrow key until 'Print=All' is displayed.
6.
Press the down arrow key several times until !Print Mem! is
displayed.  Press 
Enter
.  The data will be sent.
LI-1200S Minimum Data Set Recorder
The LI-1200S is configured as a DTE device.  Most computers can
be connected to the LI-1200S using the 1000-03 printer cable and a
female-to-female gender changer.  To send files from the LI-1200S
to a computer, follow these steps:
1.
Press 
OUT
 to enter Output Mode.
2.
Choose baud rate (300 or 4800).
3.
Press 
ENTER
 to begin data transmission.