Lucent Technologies 5 ユーザーズマニュアル
MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
System Manager’s Guide
555-650-118
Issue 1
June 1997
Managing the System
Page 6-20
Programming from a PC with SPM
6
Console/Display Instructions
Additional Information
If the PC does not have a hard disk, insert the SPM diskette into Drive A.
Type
a:
and press
2
.
A:>
appears on the screen.
Type
spm
and press
2
to display the SPM Welcome screen shown below.
Press any key to display the SPM Main Menu shown below.
■
If the SPM Main Menu does not appear or if the information about the
screen is garbled, press any key again.
screen is garbled, press any key again.
■
If the COMM PORT (communications port) screen appears instead of the
SPM Main Menu, the SPM software has not been initialized. See Chapter 2
of
SPM Main Menu, the SPM software has not been initialized. See Chapter 2
of
System Programming.
NOTE:
The function keys shown on either side of the display are included
here for quick reference. On the PC screen, the system
programming keys do not look like actual keys.
here for quick reference. On the PC screen, the system
programming keys do not look like actual keys.
To reach the System Programming menu, select
Sys Program
by pressing
.
Perform the procedures in the task descriptions as outlined in this chapter.
Welcome to SPM
X.XX
= current version of SPM
The MERLIN LEGEND
System Programming
& Maintenance Utility
Please press any key
to continue
Version X.XX
SPM Main Menu
Menu: Select Function
Sys Program
Maintenance
Backup
Restore
Boards
Pass-Thru
Print Opts
Password
Monitor
Language