Vertex Standard FT-2000 ユーザーズマニュアル
Page 98
FT-2000 O
PERATING
M
ANUAL
M
EMORY
O
PERATION
S
TANDARD
M
EMORY
O
PERATION
Moving Memory Data to the Main Band (VFO-A)
You may transfer the contents of the currently-selected memory channel into the Main band (VFO-A) register, if you like.
1. Press the [V/M] button, as necessary, to go to the
Memory mode. The memory channel number will ap-
pear in the multi-panel window.
pear in the multi-panel window.
2. Press the [M CH] button. The Red LED inside the
switch will light up, indicating that you are ready to
recall a memory channel.
A
recall a memory channel.
A
DVICE
:
If the Red LED imbedded in the [M CH] button does
not light up, check to be sure that the orange lamp to
the right of the [SUB VFO-B] knob is not illuminated.
If it is, press the [A/B] switch to make it go out, then
press the [M CH] button again.
not light up, check to be sure that the orange lamp to
the right of the [SUB VFO-B] knob is not illuminated.
If it is, press the [A/B] switch to make it go out, then
press the [M CH] button again.
3. Rotate the [SUB VFO-B] knob to select the memory
channel the contents of which you wish to transfer to
the Main band (VFO-A).
the Main band (VFO-A).
4. Press and hold in the [M
A] button for two seconds,
until you hear the double beep. The data in the selected
memory channel will now be transferred to the Main
band (VFO-A).
memory channel will now be transferred to the Main
band (VFO-A).
A
DVICE
:
This transfer of data to the Main band (VFO-A) does not
affect the original contents of the memory channel; this is
a “copy” function that leaves the memory contents un-
changed.
affect the original contents of the memory channel; this is
a “copy” function that leaves the memory contents un-
changed.
1. Press the [V/M] button to recall any memory channel.
2. Rotate the Main Tuning Dial knob; you will now ob-
2. Rotate the Main Tuning Dial knob; you will now ob-
serve that the memory channel’s frequency is chang-
ing.
A
ing.
A
DVICE
:
The “
” icon will replace the “
” icon in the
multi-panel window, indicating you are in the
“Memory Tune” mode.
“Memory Tune” mode.
During Memory Tune operation, you may change
operating modes, and engage the Clarifier, if de-
sired.
sired.
3. Press the [V/M] button momentarily to return to the
originally-memorized frequency of the current memory
channel. One more press of the [V/M] button will re-
turn you to VFO operation.
channel. One more press of the [V/M] button will re-
turn you to VFO operation.
[SUB VFO-B] Knob
[V/M] Button
[M CH] Button
[M
A] Button
N
OTE
:
Computer software programs utilizing the CAT system
interface port may presume that the transceiver is operat-
ing in the VFO mode for certain features like “band map-
ping” and/or frequency logging. Because the “Memory
Tune” mode so closely resembles the VFO mode, be sure
that you have the FT-2000 operating in a control mode
compatible with your software’s requirements. Use the
VFO mode if you’re not sure.
interface port may presume that the transceiver is operat-
ing in the VFO mode for certain features like “band map-
ping” and/or frequency logging. Because the “Memory
Tune” mode so closely resembles the VFO mode, be sure
that you have the FT-2000 operating in a control mode
compatible with your software’s requirements. Use the
VFO mode if you’re not sure.
Main Tuning Dial Knob
[V/M] Button
Memory Tune Operation
You may freely tune off of any memory channel in a “Memory Tune” mode that is similar to VFO operation. So long as
you do not over-write the contents of the current memory, Memory Tune operation will not alter the contents of the
memory channel.
you do not over-write the contents of the current memory, Memory Tune operation will not alter the contents of the
memory channel.