Vertex Standard FT-2000 ユーザーズマニュアル
Page 38
FT-2000 O
PERATING
M
ANUAL
O
PERATION
ON
60-M
ETER
(5 MH
Z
) B
AND (U.S.
VERSION
ONLY
)
The FT-2000 includes the capability for transmission and reception on the five spot frequencies assigned to the Amateur
Service in the United States. To operate on the 5 MHz band:
Service in the United States. To operate on the 5 MHz band:
1. Press the [V/M] button once to enter the “Memory”
mode (a memory channel number “USx” will appear
on the Multi-Display Window in the display.
on the Multi-Display Window in the display.
2. Press the [M CH] button. The LED imbedded in the
button will glow red to signify that rotation of the [SUB
VFO-B] knob will allow selection the memory chan-
nel.
A
VFO-B] knob will allow selection the memory chan-
nel.
A
DVICE
:
If the memory channel selection seems not to be oper-
ating, check see if the orange lamp to the right of the
[SUB VFO-B] knob is illuminated. If so, pressing the
[A/B] button will cause the orange lamp to the right of
the [SUB VFO-B] knob to go out. Now, press the [M
CH] button to begin memory channel selection.
ating, check see if the orange lamp to the right of the
[SUB VFO-B] knob is illuminated. If so, pressing the
[A/B] button will cause the orange lamp to the right of
the [SUB VFO-B] knob to go out. Now, press the [M
CH] button to begin memory channel selection.
3. Memory channels “US1” through “US5” are pre-pro-
grammed, at the factory, with the permitted frequen-
cies in the 5 MHz band, and the USB mode is auto-
matically selected on these channels.
cies in the 5 MHz band, and the USB mode is auto-
matically selected on these channels.
4. To exit from 60-meter operation and return to the VFO
mode, just press the [V/M] button.
N
OTE
:
The frequencies and operating mode for 5 MHz band op-
eration are both fixed, and may not be changed.
eration are both fixed, and may not be changed.
Main Tuning Dial Knob
[SUB VFO-B] Knob
[V/M] Button
[M CH] Button
[A/B] Button
B
ASIC
O
PERATION
:
R
ECEIVING
ON
A
MATEUR
B
ANDS