Vertex Standard VX-8R ユーザーズマニュアル

VX-8R O

PERATING

ANUAL

124

ATT (F

RONT

TTENUATOR

)

The attenuator will reduce all signals (and noise) by 10 dB, and it may be used to make
reception more pleasant under extremely noisy conditions.

1. Set a band (“A-Band” or “B-Band”) on which you wish to activate the “attenuator” to

the “Operating” Band (indicated in large character).

2. Press and hold the

key for one second to enter the Set Mode.

3. Rotate the DIAL knob to select Set Mode Item 3: ANTENNA

3: ANTENNA

ATT

4. Press the

key briefly to enable adjustment of this Set

Mode Item.

5. Rotate the DIAL knob to change the setting from “OFF

OFF

” to

“ON

”.

6. When you have made your selection, press the PTT key to

save the new setting and exit to normal operation.

7. If you wish to disable the attenuator, just repeat the above procedure, rotate the DIAL

knob to select “OFF

OFF

” in step “5” above.

1) When the attenuator is activated, the “ ” icon
will appear on the display.
2) The attenuator does not activate on the AM/FM

Broadcast Bands.
3) The attenuator can be set independently on each operating band of the “A-Band”
and “B-Band”.

ISCELLANEOUS

ETTING