Vertex Standard VX-8R ユーザーズマニュアル
VX-8R O
PERATING
M
ANUAL
159
S
ET
M
ODE
I
TEM
99: TONE FREQUENCY
Function: Setting of the CTCSS Tone Frequency
Available Values: 50 standard CTCSS tones
Default: 100.0 Hz
Available Values: 50 standard CTCSS tones
Default: 100.0 Hz
S
ET
M
ODE
I
TEM
100: TONE-SRCH MUTE
Function: Enables/Disables the receiver audio output while the Tone Search Scanner is
activated.
Available Values: ON / OFF
Default: ON
activated.
Available Values: ON / OFF
Default: ON
S
ET
M
ODE
I
TEM
101: TONE-SRCH SPEED
Function: Selects the Tone Search Scanner speed.
Available Values: FAST (2.5 tone/sec) / SLOW (1.25 tone/sec)
Default: FAST (2.5 tone/sec)
Available Values: FAST (2.5 tone/sec) / SLOW (1.25 tone/sec)
Default: FAST (2.5 tone/sec)
S
ET
M
ODE
I
TEM
102: TOT
Function: Setting of the TOT time
Available Values: OFF / 0.5min - 10.0min (0.5min/step)
Default: 3.0min (3 minutes)
The time-out timer shuts off the transmitter after a continuous transmission which is equal
to the programmed time.
Available Values: OFF / 0.5min - 10.0min (0.5min/step)
Default: 3.0min (3 minutes)
The time-out timer shuts off the transmitter after a continuous transmission which is equal
to the programmed time.
S
ET
M
ODE
I
TEM
103: UNIT OFFSET
Function: Cariblating the Sensor Unit.
Available Values: BARO:
Available Values: BARO:
–1
000 ~ +1000, ALTITUDE:
–1
000 ~ +1000
Default: BARO: 0, ALTITUDE: 0
S
ET
M
ODE
I
TEM
104: UNIT SELECT
Function: Select the measurement units of the Sensor Unit.
Available Values: TEMP: °C / °F, BARO: hPa / mb / mmHg / inch, ALTITUDE: m / ft
Default: Depends on the transceiver version
Available Values: TEMP: °C / °F, BARO: hPa / mb / mmHg / inch, ALTITUDE: m / ft
Default: Depends on the transceiver version
S
ET
M
ODE
I
TEM
105: VFO MODE
Function: Selects or disables the VFO band edge limiting for the current band.
Available Values: ALL / BAND
Default: BAND
ALL:
Available Values: ALL / BAND
Default: BAND
ALL:
When the VFO frequency reaches the high edge of the current band, the VFO
frequency will jump to the low band edge of the next band (or vice versa).
frequency will jump to the low band edge of the next band (or vice versa).
BAND: When the VFO frequency reaches the high band edge of the current band, the
VFO frequency will jump to the low band edge of the current band (or vice versa).
S
ET
M
ODE
S
ET
M
ODE
S
ELECTION
D
ETAILS